shirtsraka.blogg.se

1. #EXTERIOR PAINT 2 OR 3 COATS SKIN#
2. #EXTERIOR PAINT 2 OR 3 COATS PROFESSIONAL#
3. #EXTERIOR PAINT 2 OR 3 COATS WINDOWS#

A dust mask does not provide protection against vapors.

#EXTERIOR PAINT 2 OR 3 COATS PROFESSIONAL#

If properly used, a respirator (NIOSH approved for organic vapor with P series particulate pre-filter) may offer additional protection obtain professional advice before using. If you experience eye watering, headaches or dizziness, increase fresh air.

#EXTERIOR PAINT 2 OR 3 COATS WINDOWS#

To avoid breathing vapors and spray mist, open windows and doors or use other means to ensure fresh air entry during application and drying. WEAR EYE PROTECTION AND PROTECTIVE CLOTHING.

#EXTERIOR PAINT 2 OR 3 COATS SKIN#

AVOID CONTACT WITH SKIN AND EYES AND AVOID BREATHING OF VAPORS AND SPRAY MIST. MAY CAUSE EYE, NOSE AND THROAT IRRITATION. This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm. For warranty service, call: 1-86, or email: Masterchem Industries LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. If this product is found not to perform as specified on the label during the warranty period, Masterchem Industries LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. Masterchem Industries LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. Contact the National Lead Information Center at 1-800-424-LEAD or log on to *LIFETIME LIMITED WARRANTY If you scrape, sand or remove old paint, you may release lead dust. To reduce waste, consult with your retailer or an online paint calculator to determine the correct amount of paint to purchase.

per gallon on rough surfaces.ĭries to touch in 2 hours (at 77° F and 50% R.H.) or longer in cooler temperatures and/or higher humidity.Ĭlean all tools and equipment with clean water.įor disposal of empty containers and unused product, contact your household refuse collection service. per gallon on smooth surfaces and 200-300 sq. For heavily textured surfaces such as stucco, a 3/4" roller is recommended.Īirless Spray -.015". Use a high quality synthetic brush or 3/8"-1/2" synthetic roller. Intermix containers of the same product to ensure color and sheen uniformity. Use product when the surface and air temperatures are between 50-90☏. Remove dust with a damp cloth and allow to dry.Īllow new stucco, plaster and masonry to cure for 30 days before priming and painting. Glossy surfaces must be scuff sanded with appropriate sandpaper prior to coating. Rinse well and allow surface to dry.Ĭountersink all nailheads, repair imperfections and sand smooth.

Remove any loose or peeling paint and wash off dirt or grease with a non-soapy detergent or a TSP substitute. Use on properly prepared and previously painted or primed surfaces. For heavily stained surfaces, we recommend applying a coat of primer such as KILZ® PREMIUM Primer/sealer/stainblocker. Do not use on floors.įor best results, use two coats on lightly stained, porous and repaired surfaces. NOTE: For vinyl siding, only paint with a color lighter than the original siding color.